Gil Ash of OSP Shooting Schools demonstrates why shotgun shooters shouldn’t look down the barrel, nor at the bead. By focusing on the target you might see fewer targets but you’ll surely break more.
When shooting an M1 Garand and here I am talking about a service or field grade rifle not a match grade rifle, there are three areas to check. Like buying a used car there are usually a few areas you want to examine to insure the car will operate properly. Three areas to check that will ensure your Garand will shoot fairly good groups are tightness with the gas cylinder, rear sight, and stock lock-up. The gas cylinder is held in place by three splines on the barrel, the gas cylinder lock, and gas cylinder lock screw. What is important here is that there is no movement, wiggle side-to-side of the gas cylinder on the barrel. A loose gas cylinder will effect grouping or cause several groups on your target. There is an easy fix to eliminate this problem. What you will require is a ½ inch socket, small hammer, 1/8 inch steel punch, and block of wood. When looking at the barrel from the muzzle end there are three splines, one at 12 o.clock, another at 4 o.clock, and another at 8 o.clock. You first want to lay the barrel with the top spline up and the 6 o.clock …
